The Three Most Common Door Lock Problems

You probably haven’t thought much about problems that can happen to your door lucks until an issue came up for your family. You knew that your locks were getting old or that you could always call a locksmith if something ever went wrong, but what are the most common door lock problems that happen and you should be aware of?

For starters, you could end up with a key breaking in the lock or just a key that isn’t working right. In another scenario, you could end up with your locks misaligning or being too loose, or even a slow lock and faulty door issues. Take a closer look below at the three most common areas of door lock problems. 

The key doesn’t work or broke

Have you ever tried to turn your key and it broke in the lock? Perhaps the key got stuck in the lock or maybe even the key won’t insert at all. Key issues are one of the most common door lock problems. 

If your key broke inside the lock because you tried to force it to turn after it got stuck, you can try to pull it out with pliers. If that doesn’t work, call a professional to help as they may need to help you try to get it out. 

If the key isn’t working, first make sure you are using the right key. If you are, then you may be having an issue with a deadbolt not interacting properly with the strike plate, which you would be able to find out in the case that you do finally open the door and find that the key now works fine.

 If it’s a new key, it may have been cut improperly. Call the locksmith to get this looked into and to see if it’s a bad key or a broken lock. 

Misaligned locks or loose locks 

Next, you could run into a lock issue in which you have poor alignment or it’s too loose. You want the deadbolt to fit properly into the strike plate along the door jam, but when it’s off even by a little, the lock may not work at all. This can sometimes happen when a person is too rough on the door or if a door isn’t installed properly or shifts from conditions like too much humidity. 

You could also be dealing with a loose handle or lock since these things will loosen up over the years. This is an easy fix with a tightening of screws, but if you wait too long to correct it, you’ll likely end up needing to call for help with an emergency lockout. 

Slow lock or faulty door 

Finally, beware of slow locks and faulty doors. A slow door lock is common when dirt or grime accumulates in the lock. This is not a hard fix, but it’s easy to make it worse which is why you should call a professional to help correct it. 

A faulty door mechanism can also happen with time and wear and tear. With excessive use and not getting the maintenance they need, they can become defective. In those scenarios, you’ll want to properly maintain your locks and doors to avoid a slow lock or faulty mechanism because these are mechanical functions that only a professional will be able to properly repair later on. 

These are a few of the most common door lock problems that you could come across on your property. Be sure to maintain your doors and locks, and call a local Chicago locksmithin the event that you need something repaired.

What is Lock Snapping and How to Prevent it?

One of the most common ways a burglar will break into your home is through the entry door. They use different tactics to get in through your door, such as your spare key in the fake rock or simply taking advantage of you forgetting to lock the door.

Even if you do everything correct, a burglar may break in through a method known as lock snapping. This common way of getting into a home usually happens due to a homeowner believing their home is secure when it's not.

Understanding What Lock Snapping is

A technique that doesn't require much skill, burglars use lock snapping, also called cylinder snapping to get into your home. Since this method doesn't require much skill or any special equipment, it's very common. All the intruder needs is a hammer and screwdriver to get into your home and they can do it very quickly with lock snapping.

Usually, this method is applied to a Euro profile cylinder lock, which is commonly used on uPVC doors. Even though the lock has multi-locking points, they are operated by a single-cylinder, which can be snapped into two halves rather easily. The burglar just has to apply the right force to the cylinder and it will break.

Once the lock snapping has occurred, entry into your home is rather easy. The burglar can now open the door with simple household tools and gain access to your belongings.

Simply put, lock snapping is the process of applying for to a lock cylinder to snap it in half. A burglar with very little experience can snap your lock in a matter of seconds.

How to Prevent Lock Snapping

Preventing lock snapping starts with figuring out if your locks are vulnerable. Make sure to check all entry points to your home as not all burglars break in through the front door. If you want a professional to check your locks, call a local Chicago locksmith. They will be able to tell you if your locks are anti-snap and if not, they can recommend the right upgrade to protect your home.

If you decide to check your locks on your own, you want to find out if you have cylinder locks that can easily be snapped. Look to see if the lock sticks out of the door handle and protrudes very easily. If so, it's likely time for an upgrade.

Install the Right Locks

The best way to prevent lock snapping and make your home more secure is installing the right locks. Have a locksmith install the highest quality locks for your doors and make sure they are anti-snap locks. Having an anti-snap lock fitted to your door will ensure you don't have to worry about a burglar breaking in, even if you locked the door.

Anti-snap locks have a tested cylinder that keeps the lock from being snapped by the method used by burglars. They can attack this lock, but it won't snap like a traditional euro-cylinder lock will.

As long as your new locks are properly fitted and installed, you won't have to worry about snapping. A professional locksmith will be able to make the right recommendation for your door and install the proper lock to better protect your home.

How can you increase the security of a door lock?

Your door locks are in place in your home to protect your home and your family. That is why it’s important to always take the time to perform maintenance and increases to your home’s security system. This all starts by ensuring your locks are as secure as the day you first bought them and utilizing technology to increase your security as new features hit the market. Take a look at the ways you can increase the security of your door lock and keep your home safer.

Upgrade them

Start by upgrading your locks. Since this is a thing you use every single day and it’s a major way that you keep your home secure, you should make sure you are using the right kind for your door and that it’s working properly. Did you choose one that is appropriate for your door? Is it going to be weak against blunt force or the use of a bump key?

It may be time to call a locksmith to replace your old locks and install one of the trusted brands of door locks on the market. It’s also a great time to make sure you have a deadbolt since the handle or keyed knob is less important. Your deadbolt will be much harder to break-in compared to a spring loaded latch because you can’t get the bolt to move without rotating it at its core.

Your front door’s locking system is your entire security system to your home, which is why it’s so important to have the latest technology in door locks and have a professional locksmith install it for you. The wrong locks could mean a break-in and harm to your entrance. Make sure to get a deadbolt that extend one inch beyond the door and choose be a high-quality brand like Medeco that will be resistant to lock-picking or fake keys.

Reinforce your doors and glass surfaces

Next, take the time to have your doors and glass surfaces examined. These are other ways that criminals will try to break in. If you are using an old, light-weight door, it may be time to replace it with a solid door made with hardwood or metal inserts.

Have a professional locksmith come out to reinforce doors that do not need replaced and then have them examine your windows. Since windows are by most front doors, a criminal may try to break-in through this method. Strengthen your windows and glass by replacing them with a stronger material or by adding a security window film for extra protection. You can get a tinted window film or a clear one that will at least discourage most burglars because it’s not easy to shatter.

Add a security screen

Speaking of window films, you can also add a security screen to your front door. This is basically like having two doors in which one door is in front of the other door. This allows you to have a metal barrier with additional locks for your front door. Since they are made to open out, attempting to kick them in will likely be unsuccessful.

If a criminal sees additional deadbolts and keyed knobs to get in a house, they may give up on their plans. You will have the option to see through this door much better than a peephole while still remaining inside the house.

Lengthen set screws

Talk to your locksmith about how they can lengthen set screws. This is another trick to improve home security that is simple but effective. Simply have your strike plate and hinges’s ¾ inch set screws changed to 3-inch screws. If someone tries to kick the door in, you’ll find that the door is more likely to just splinter and fracture but not actually get kicked in.

Typically with the shorter set screws, when the door is kicked in the strike plate will get torn off the door when the trim is breaking. With a longer set screw, the strike plate won’t be as vulnerable since you are likely just attacking the stud of the door jam. You must also secure the door’s strike plate and hinge side in order for this to be effective during an attack.

Maintain and install more hardware

Finally, make sure you take the time to maintain your hardware and add additional features where needed. You can use slipcovers to add more metal content to a door to help strengthen it where it has vulnerabilities. If you have exposed or weakened bolts that you use to secure a door, get a cover that extends over the jam.

Consider installing securing devices from inside the home, such as a lock in the middle of the door or a chain lock. Add front door monitoring through surveillance cameras, smart locks, and smart doorbells to improve your ability to see what’s going on and deter criminals.

Use these tips to increase your front door locks since it is the most important security feature of your home!

How to Maintain Your Door Locks

Your home has plenty of door locks and you need to keep them maintained. If you're like most, you lock your doors often, which can wear out your locks over time. Maintaining your door locks helps to keep you from needing to replace the locks as often.

Door locks don't work forever. Even well-maintained locks will wear out over time. Here are some of the best tips you can use to ensure your door locks last a very long time.

Make Sure Your Door is Hung Properly

If you don't know was a properly hung door looks like, you can have a residential locksmith inspect the door for you. You want to make sure the door isn't sagging and is completely even with the frame. If the door isn't hung properly, it can put unnecessary pressure on the lock, which can cause an issue.

Properly hung doors won't bind and there won't be an uneven gap. You want a uniform gap along the sides and the top of about an eighth of an inch or at least less than a quarter of an inch.

Lubricate Your Locks Regularly

If you want to make sure your door locks function smoothly, you should use a lubricant about once or twice a year. Dry lubricants are very easy to apply and will help to ensure the lock remains in working order. Simply lubricate the inside of the lock with the key by moving it in and out a few times.

Clean Your Locks

You will also want to clean your door locks to keep them well-maintained. Use a mild detergent or a damp rag to clean the outside of the locks. If you use an abrasive or chemical cleaner, it can do harm to the lock. Even a petroleum-based cleaner may damage the finish of the lock.

Only Copy the Original Key

It can be a very bad thing for your door locks if you copy a copy of the original key. Always make your copies from the original key to ensure you get the best possible duplicate key for your door locks.

Check Your Deadbolt

You want to make sure you can easily secure the deadbolt without having to push or pull the doorknob. If you have to move the door around to get it to lock with the deadbolt, it means the lock or the frame wasn't installed correctly. Make sure the deadbolt extends all the way when locked, as well.

Check the Strike Plate and Screws

You want to make sure at least one of the screws in the top hinge is long enough to secure the door to the wall frame. This helps to prevent sagging and adds a bit of security. Usually, you want to add three-inch or longer screws to each hinge.

In addition, you want to check the strike plate to ensure it’s secure. You want to use long screws for this, as well.

Maintaining your door locks is very important if you're a homeowner. Locks that don't work right could cause an issue and may make it easier for your home to be broken into. Make sure you keep your door locks maintained and if you need work done to the locks, contact a professional Chicago locksmith.